Manicura polibase

APPLICATION OPTIONS:

For different types of nail plates, choose one of the following combinations of uses: BOND * + Polybase.

Depending on the type of nail plate, choose one of the additional binders.

* Acid-free Bond, Extra Bond Nail Repair, Acid Primer, Base Coat + Polybase.


An additional option is to use a transparent base to smooth out extremely deformed nails, or to ensure even better adhesion of the nail plate to the Polybase.

Use of Polybase with gel, acrylic, and polygel systems as a color coating.


METHOD OF USE:

Prepare the nail plate as usual: do a manicure and give the nail shape.

Remove excess grease and moisture using the Didier Lab Dehydrator on the nail plate. Varnish all nails with the selected additional bonding agent: Acid-free Bond, Extra Bond Nail Repair, Acid Primer, or transparent base.

Apply dark Polybase colors with 1 thin layer and dry in a lamp LED lamp 60s / UV 2min (at a lamp wavelength of 395-405nm)

Apply Polybase second layer and dry in a lamp in an LED lamp 60s / UV 2min (at a lamp wavelength of 395-405nm)

Apply Top-coat with the selected top coat of gel polish. Dry in LED lamp 60s / UV for 2min.

* Light colors can be varnished with 1 rich forming layer due to permeability. Varnish dark colors in 2 coats.


IMPORTANT! Did you know that the drying of highly pigmented varnishes in a lamp is affected by nanometers (beam length)? Make sure your lamp is powerful enough. The most suitable wavelength for the new generation of highly pigmented varnishes is 395-405nm. If your lamp has a shorter wavelength to ensure proper polymerization of the material, double the drying time.

Choose a lamp with a white or mirror bottom. These reflections improve the quality of the polymerization. If you do not have such a lamp, just place a white sheet, a mirror or a piece of aluminum foil under the bottom of the lamp.

1. Prepare the nail plate as usual: shape the nail with the 180/240 grit file.

2. Remove cuticles: apply the cuticle remover and leave it on for a while. Wipe off the cuticle remover with warm water or dehydrator. Push down the cuticles with wooden sticks and trim them precisely.

3. Roughen the nail plate with buffer.

4. Remove excess moisture from the nail plate with the Didier Lab Dehydrator.

5. If additional nail plate preparation is needed, apply bonding agent: Acid Free Primer, Regenerating Extra Bond, Acid Primer or Clear Base. (NOTE: This step is not necessary!)

6. Apply Base Coat and let it dry under LED lamp for 30sec or UV lamp for 1 min.

7. Apply gel polish in 1-2 coats. The number of layers depends on the desired result. Let it dry under the LED lamp for 60s or under the UV lamp for 2min (with a lamp wavelength of 395-405nm).

8. Apply top coat and let it dry under LED lamp for 60 sec or UV lamp for 2 min.

9. Apply cuticle oil. The nail oil helps to strengthen nails and cuticles in the long term.

10. Use the hand cream - increases skin elasticity.

Removal:
Roughen the sealing layer with a nail file.

Soak the nail wraps with acetone and wrap tightly around the nails. Leave on for about 10 minutes.

Use a wooden stick to gently push the nail polish down.

Remove the rest of the product with a file.

The UV nail polish can also be removed with a cutter, but you have to be gentle and careful to a void thinning of the fingernails.

Di-Hema Trimethylhexyl Dicarbamate, HEMA, Isobornyl; methacrylate. Cellulose Acetate Butyrate, PEG-9 dimethacrylate, Hydroxycyclohexyl Phenyl Ketone, Trimethylbenzoyl diphenylphosphine oxide, Silica, Glycol HEMA-methacrylate, Bis ( methacryloyloxyethyl) phosphate, Hydroquinone, p-Hydroxyanisole, Titanium dioxide/CI77891, Violet2/CI60725

ENVIAMOS TODOS LOS PEDIDOS DESDE EL ALMACÉN DE EE. UU. DE DIDIER LAB.
Si realiza su pedido antes de las 11:00 a. m., lo enviaremos ese mismo día y podrá esperar su pedido dentro de 1 a 3 días hábiles.

Nuestra política de devoluciones tiene una duración de 30 días. Si han pasado 30 días desde su compra, lamentablemente no podemos ofrecerle un reembolso o cambio.
Para ser elegible para una devolución, su artículo debe estar sin usar y en las mismas condiciones en que lo recibió. También debe estar en el embalaje original.
Para cualquier duda póngase en contacto con nosotros en info@didierlab.com